✓ Serving All of DFW Since 2003
✓ Cedar & Pressure-Treated Pine
✓ Repairs & Full Replacements
Custom Installation
Custom ornamental and security wrought iron builds plus pool enclosures across the Dallas Fort Worth metroplex. Family-operated since 2003.
Mack Fencing designs and installs wrought iron fences across DFW. Every job is built to the property rather than dropped in from a stock catalogue. Residential security perimeter and pool enclosure work is in scope. Decorative front yard and commercial property line builds are covered too. Custom driveway gates round out the typical project list.
Wrought Iron Fence Installation in DFW
CUSTOM IRON BUILDS
Custom Wrought Iron Fence Builds Across the DFW Metroplex
A wrought iron fence is the longest-lasting fence material on the residential market. With basic maintenance, a wrought iron fence outlasts wood by 20 years and outlasts most chain link installs by a similar margin. The Mack team handles every wrought iron fence build to the actual yard rather than a generic spec, with custom design on every job because no two DFW lots have the same setbacks or sight lines.
Standard residential heights run 4 to 6 feet. Pool enclosures sit at 4 feet to meet pool code. Security and commercial perimeter builds go up to 8 feet. Pedestrian and driveway gates get built into the run as part of the same job rather than added as a separate phase.
FENCE STYLES
Wrought Iron Fence Styles for DFW Properties
Tubular steel is what most homeowners actually mean when they say 'wrought iron fence'. Hollow steel pickets and rails, powder-coated black or bronze, with the same ornamental look as traditional wrought iron at a lower price point. Most residential builds across Plano and Frisco are tubular steel.
Tubular Steel Residential
Five wrought iron fence categories cover most of what gets installed across DFW residential and commercial properties. The right one depends on use case rather than just aesthetics. Mack works across all five and switches between them within a single property when the perimeter requires it.
Ornamental Wrought Iron
True ornamental wrought iron uses solid pickets with hand-forged or cast decorative details (finials, scrolls, custom toppers). Higher cost than tubular steel and slightly heavier visually. A common choice for upscale front yards in Highland Park and Southlake where HOA codes call for ornamental detail.
Pool Code Wrought Iron
Pool enclosure fences have specific Texas code requirements. Minimum 4-foot height and picket gaps under 4 inches set the structural standard. Self-closing self-latching gates with the latch above 54 inches finish the code requirements. Mack builds pool-code wrought iron fences across DFW including the gates so the install passes inspection on the first walkthrough.
Commercial and Security Perimeter
Commercial and security applications run 6 to 8 feet, often with anti-climb features like spear tops or double pickets. Rod inserts are another option for tighter security spec. Used on warehouse perimeters and gated communities, plus commercial properties across the Dallas industrial corridor. Built to a heavier gauge steel than residential.
Custom Driveway and Pedestrian Gates
Wrought iron gates are usually built as part of the fence install rather than separately. Mack designs custom driveway gates and pedestrian gates to match the rest of the perimeter. Auto-gate openings get built into the same run. Sliding and swing configurations available, plus bi-fold for tighter driveways.
Real vs Modern
Real Wrought Iron vs the Modern Iron Fence
Real wrought iron is rarely manufactured today. The original wrought iron, hand-forged from iron with low carbon content, hasn't been mass-produced since the mid-20th century. What gets called 'wrought iron' in the modern fence industry is one of two things: tubular steel formed and powder-coated to mimic the look, or solid mild steel pickets with decorative castings.
The practical difference for a DFW homeowner is mostly cost and weight. Modern tubular steel iron fences sit at a much lower price point than true wrought iron would, and they're easier to ship and install. The look is the same to 99% of buyers. Mack uses both modern tubular steel and solid mild steel ornamental depending on the spec.
Texas Weather
Why a Wrought Iron Fence Lasts in Texas Weather
Rust is the only real enemy of a wrought iron fence in DFW. Heat and clay soil don't shift iron the way they shift wood posts, and the metal doesn't warp or split. What kills an iron fence is moisture sitting on bare metal long enough to oxidise. Powder coating and galvanised primer are how the modern iron fence solves that problem.
Mack installs wrought iron fences with a galvanised steel core and a powder-coat finish over the top. The combination resists rust through DFW's humidity swings and hail seasons. Touch-up paint kits handle the occasional scratch from a lawnmower or weed eater so a small ding doesn't turn into a rust bloom.
Post bases are the one weak point. Where the post enters the concrete footing, water tends to pool and slowly attack the coating from underneath. Mack uses concrete footings poured with a slight crown to shed water away from the post base, plus a sealant at the contact point
Service Area
A Local DFW Wood Fence Contractor Since 2003
Beyond wrought iron fence installation, Mack also builds wood fences and custom auto gates. Concrete work covers driveways and patios, with mow strips run as part of the same service line. A single contractor takes on both the perimeter and any adjacent flatwork on one job.
Service covers the Dallas Fort Worth metroplex with regular weekly routes through 11 named suburbs:
• Plano
• Garland
• DeSoto
• Mansfield
• Grapevine
• Forest Hill
• Burleson
• Benbrook
• Irving
• Grand Prairie
• Arlington
Surrounding towns and smaller communities are served on the same routes. See more on the dedicated wood privacy fence
Testimonials
KIMBERLY W. — DESOTO, TXX
Wood privacy fence installation
"Mack Fencing far surpassed my expectations. Mr Williams listened to what we wanted, made suggestions where it mattered, and the crew delivered a fence that looks better than what I'd seen at twice the price. The professionalism alone was worth the call."
Common Questions About Wrought Iron Fence Installation in DFW
How much does it cost to put in a wrought iron fence?
Wrought iron fence cost in DFW comes down to a few variables. Picket profile and height set the materials baseline. Linear footage and gate count push the final number from there. A standard residential tubular steel fence at 4 to 5 feet sits at the entry end of the range. Ornamental wrought iron with custom finials sits higher. Commercial security perimeter at 8 feet is the premium tier. A free on-site quote is the only way to get a real number for the property.
Why is wrought iron not used anymore?
Real wrought iron is rarely manufactured today because the production method (hand-forging iron with low carbon content) is more expensive than modern alternatives. What gets called 'wrought iron' in the fence industry now is tubular steel or solid mild steel formed and powder-coated to look the same. The look is identical to most buyers. The cost and weight are much lower.
What is the new law on fences in Texas?
No major statewide fence law has passed recently in Texas. Fence rules in DFW are set at the municipal level (height limits, setback rules, permit requirements) and by HOA covenants in each subdivision. Texas Property Code does cover some shared-fence disputes between neighbours, but that's longstanding rather than new. Always check with your city and HOA before committing to a build.
Is a wrought iron fence cheaper than wood?
A wrought iron fence costs more than wood upfront. Cedar wood typically sits at half the per-foot install cost of tubular steel iron, and pressure-treated pine sits lower still. Over a 40-year window, however, wrought iron becomes the cheaper option because it doesn't need staining every few years and lasts 2 to 3 times longer than wood.
Do I need a permit for a wrought iron fence in DF?
Permit requirements vary by city. Fort Worth and Dallas both require permits for new fences above a certain height. HOA approval is often required on top of the city permit, particularly for front-yard wrought iron. Pool code fences have their own separate inspection.
How long does a wrought iron fence last in DFW?
A properly coated wrought iron fence lasts 40 to 60 years in DFW with basic maintenance. The key tasks are spot-treating any rust as soon as it appears and repainting the powder coat every 10 to 15 years. Skipping rust treatment is what cuts the lifespan, not the Texas climate itself.
